Wireless DMX Light Show System

Description

Wireless DMX Light Show System
Local Pickup only.
This DMX-based lighting setup consists of 9 programmable fixtures organized in 3 separate assemblies and connected wirelessly to a DMX hardware controller. The controller is USB connected to a computer and runs automated sequences of light patterns  that can be synced with a source of music when needed. Presets (sequences of patterns) can be cycled with a footswitch or could be called independently using a MIDI foot controller. All "shows" are being defined with the help of the DMXIS software in an easy, interactive manner. Each light fixture assembly only requires a local connection to the mains power and could communicate with the controller-coupled-transmitter from up to several hundred feet (we only tested through 3 rooms).
After first installing DMXIS, the software has to be updated for the show and library folders mentioned lower. This insures that this specific fixture set can be further used for show development; the predefined custom demo show will then be  immediately usable, as all fixtures are already preset.
Included in the lighting setup:
DMX hardware controller and DMX wireless transmitter
5x DMX wireless receivers - 3 mounted, 2 for future extensions of the setup
1x "Laser Show System" (red and green lasers, step motor, sound controllable)
2x "Flat LED Par Light" (RGBW power LEDs dimmable at various speeds, sound controllable)
2x "ADJ RevoBurst" (projects patterns of round patches of light at various angles, strobe speeds and dimming levels, is sound controllable)
2x "ADJ ProfilePanel RGB" (ultrabright LEDs light up in various chasing or strobing patterns, dimmable and sound controllable)
2x "ChauvetLED Shadow" (powerful Ultraviolet-only panel with built-in programs, sound controllable)
3x mechanical/electrical assemblies, tripod-based, including embedded power strips and professional linkage elements allowing for fixture tilt/swivel.
2 "Tee" assemblies with a max height of 8ft, 4ft wide, 2" tubing, host the "ProfilePanel" and the "LED Shadow" panel
1 Dual Tripod Light bar assembly with a max height of 6 ft, 3ft wide, 1.25" tubing, hosts "RevoBurst" units, "Flat LED Par Lights", the "Laser Show System"
Fixture specification documents
DMX Controller manual with software unlock code and installer CD
1x 20" Disco Ball
Watch Video
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
From the manufacturer:
"Since 2009, DMXIS has been helping bands & performers around the world automate their light shows. DMXIS is the easy way to create exciting live light shows with your Mac OS or Windows-based computer.
Your light show is pre-programmed in advance of your gig (using simple sliders and effects tools). Then during the gig you simply step through your lightshow with a basic footswitch, or (for more control) use a MIDI foot pedal or keyboard to switch between scenes and fade your lighting up & down. DMXIS includes both the software and a professional standard single-universe USB-DMX hardware interface, designed by ENTTEC.
DMXIS is a flexible, easy to use lighting control package, specifically designed for live performers.
Most lighting controllers assume that an operator is available to manually control the show. They are often packed with features that are of little use to the live performer who just wants a nice looking light show with a minimum of fuss. DMXIS was designed specifically for live performers who want to run an automated light show while performing on stage. The hardware is incredibly easy to connect up, and the software extremely simple to learn and operate, while being flexible enough to control modern intelligent light fixtures.
With DMXIS, you pre-program your entire light show in advance, letting you concentrate on your live performance. You can then manually step through the light show using a simple footswitch plugged into the DMXIS hardware interface. Or, if you use audio software such as Logic, Ableton Live, Cubase or Mixmeister in your live show, you can use the DMXIS plug-in (VST or Audio Unit) to run your lights directly from your audio software! This is incredibly effective, as your light show automatically synchronises to the performance, even if you change tempo live. "
See more info at:
https://www.dmxis.com/dmxis/
https://www.dmxis.com/download/
Custom Show folder for DMXIS (to be copied to "C:\Users\Public\Documents\ENTTEC\DMXIS\Shows\") is at:
https://drive.google.com/drive/folders/1FVN22jXr8-uEUzRwe6dgbRLvEjIw30_t?usp=sharing
Custom DMX Library folder for DMXIS (to be copied to "C:\Program Files (x86)\ENTTEC\DMXIS\") is at:
https://drive.google.com/drive/folders/11udJKNSwsLpwzno_t4NlE0fg4OyccUzP?usp=sharing
User Manual is at:
https://drive.google.com/file/d/1rC9MjMQpA_s19tyCxpHbH-qbik2cCPo4/view?usp=sharing
Last version (1.7.2) of the DMXIS software also at:
https://drive.google.com/file/d/1cNouvdsGnR6j5a3-SXavzT4Fx4BznYHX/view?usp=sharing
Fixture DMX address settings doc is at:
https://docs.google.com/document/d/1oBqRpSjNYOQQ8y7THcI0wtsEaGOFC4Un/edit?usp=sharing&ouid=118181289259879156922&rtpof=true&sd=true