Electric Start Gas Driven Piston 35CFM Air Compressor 13HP 30Gal Tank Max 125psi

Description

Items Description
Type:Gas piston compressor
Model Power:13HP NO.OF CYL:3
Compression level: One-stage
compression Speed（rpm）:880
Package Dimensions:43*17*38inch
Packing Weigth: 353 lbs
Pump: One Stage
Air Outlet Size: 1/2"-18NPT
Air Pressure: 125 psi
Air Tank Capacity: 30 Gallons
Air Flow capacity: 35 cfm
Oil capacity: 57 oz.(1.7L)
Oil Type: SAE30 non-detergent Air Compressor Oil
Required Engine Idle Speed: 2000 RPM +_100 RPM
Required Rotation viewed from PTO (power takeoff-the output shaft): Clockwise
Using the Compressor
Inspect Compressor, engine, pump and equipment looking for damaged, loose, and missing parts
before set up and starting. If any problems are found, do not use equipment until fixed properly.
Note: At the beginning of the day’s first use of the Air Compressor, check for air leaks by applying soapy water to
connections while the Air Compressor is pumping and after pressure cut-out. Look for air bubbles. If air bubbles
are present at connections, tighten connections. Do not use the air compressor unless all connections are air tight.
The extra air leaking out will cause the compressor to operate too often, increasing wear on the compressor.
Before starting the Compressor
a. Follow the Set Up Instructions in the equipment manual to prepare the equipment.
b. Follow the Set Up Instructions in the Engine manual to prepare the engine.
c. Inspect all components of the setup. Make sure all nuts and bolts are tight.
d. Fill the Engine with the proper amount and type of both fuel and oil.
e. Fill the Compressor Pump with compressor oil following
the Maintenance Instructions in this manual.
Warning
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL STARTING:
Turn the Power Switch of the equipment to its “OFF” position, release tank air
pressure, wait for the engine to cool, and disconnect the spark plug cap before
performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM EQUIPMENT FAILURE:
Do not use damaged equipment. If abnormal noise, vibration, or excess
smoking occurs, have the problem corrected before further use.
Follow all service instructions in this manual. The engine may fail critically if not serviced properly.
Many maintenance procedures, including any not detailed in this manual, will need to be performed
by a qualified technician for safety. If you have any doubts about your ability to safely service the
equipment or engine, have a qualified technician service the equipment instead.
Compressor Pump Oil Maintenance
Check oil periodically for clarity. Replace oil if it appears milky or if debris is present, or
every 6 months, or 100 hours of runtime, whichever comes first. In harsh environments such
as high heat or high humidity, you will need to replace the oil more frequently.
Change the compressor oil after the first hour of use to remove any debris.
Advantages
Powered by a 420cc overhead valve gas engine with electric start and recoil backup
Heavy duty cast iron head and oil lubricated one-stage pump
ASME certified tank, throttle control and unloader valve
Cast iron cylinder for long life and durability
Easy-to-read pressure gauge, shut off pressure switch, ASME certified tank pressure relief valve, and low oil engine shutdown for added safety
Oil level viewing window and tank drain plug for easy maintenance
Sturdy steel legs with truck bed mounting holes
Mounting to a Truck Bed
Easily mounts in truck or service vehicle. This Product are designed exclusively for the heavy duty needs of the mechanic shop, livestock operation and service truck.
The two stage, cast iron, industrial air compressors work hard for serious industrial auto body and agricultural use.
Equipped with an iron construction with cast cylinder sleeves, this pump head is designed for a long time use and is easy for maintenance.
Multiple Applications
The air compressor pump is widely used for chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction,
scientific research and other requirements of high-quality compressed air sector.Ideally suitable for variable air demand from low to medium volumes,
also providing either direct driven from the motor or belt driven via pulleys from the motor.
On May 21, 2024 at 03:27:18 PDT, seller added the following information: