1/4" Refillable Desiccant/Dryer for Compressed Air Line Spray Gun Air Tools

Description

Note: Do not overtighten female brass fittings!
*Commercial grade, but priced for quick sale to non-commercial buyers.
*Install at
point-of-use,
directly attach to protect spray guns, small plasma cutters, air tools, blow guns, sand/soda blasters, single valve actuators, and other sensitive equipment that require a
clean and dry air supply
.
*
Reduce water contamination
that can cause rust, corrosion and loss of power in air tools, "fish-eyes" or blistering in paint jobs, and rapid premature electrode and nozzle erosion in plasma cutters.
* Flow-through passageways for
decreased pressure drop
as compared to other filters/separators of similar design.
*
Blue indicating desiccant beads
turn purple, then
pink
to indicate the beads need to be replaced (do not discard, can be dried for reuse!).
Silica gel desiccants work best between 70-90 degrees Fahrenheit in 60% and above humidity. Trivia - cobalt chloride is used as the water saturation indicator. The moment the indicator turns pink, the silica gel has absorbed just under 10% of its weight in water... when this figure reaches 40%, the desiccant is fully saturated and is no longer capable of absorbing any more water.
You can,roughly, estimate saturation point: multiply by 3 to 4 the length of time it takes to, initially, turn pink. For example, 1 hour to turn pink, 3 to 4 hours till full saturation.
: Maximum pressure 125 psi
:
Steel filter shafts
for strength(versus plastic/nylon models)
: 1/4" NPS filter housing assembly features
see-through
polycarbonate bowls
: Filter is
vacuum packed
to ensure dryness until opened
: Protective housing cover included
: 1/4" NPT Brass industrial quick coupler and plug included
Automotive quick coupler and plug available, contact seller
: 6” rubber hose, rated @300 psi with
crimped
brass ends, included
Example, insert hose between desiccant/dryer and spray gun/air tool
: Replacement blue indicating desiccant beads included
*Assembled in the U.S.A.
* Note- Frequent replacement of desiccant beads indicate heavy moisture content of the compressed air supply and may require cooling of the compressed air as it exits the compressor head to facilitate water droplet formation for treatment,e.g. with a water/moisture separator, BEFORE it is piped into the air tank and for this filter to work more efficiently.
* Free Shipping!!! (via USPS First Class Package)
*Returns
: 30 day, Money back, Buyer pays shipping
: The item may be returned within 30 days fora refund less 20% restocking fee. Returned merchandise must be in the same new condition with the filter still in the vacuum packaging. Used items will not be accepted for return.